Design I
For this project you will need the following supplies:
- Masking or painters tape
- Crayons or metallic crayons
- white out (the liquid with the foam tip) or white acrylic paint.
- Black tag board or illustration paper- not construction unless you use painters tape.
Black Illustration board and painters tape
Tape the perimeter of the board to create a border.
Divide the board into random shapes with masking tape.
Divide the board into random shapes with masking tape.
Use metallic crayons or oil pastels to color inside the shapes.
You can use regular crayons too. If you want brighter looking colors, color them white first, then go over the white with your color of choice.
You can use regular crayons too. If you want brighter looking colors, color them white first, then go over the white with your color of choice.
Use variety of colors. Don't use the same or similar colors next to each other.
Finish coloring.
Dab whiteout around the perimeter of each shape.
It should take some time.
It dries fast
Peel the tape back slowly. You might have to use two hands, one to hold the paper and the other to peel. If the tape starts damaging the paper, try peeling it from the opposite direction.
Ta-Da! Done!!
